How much does deck waterproofing cost in Utah?
Deck waterproofing costs about $3 to $12 per square foot for the waterproofing layer. That is a reported trade range in US Made Supply’s guide. Bonded membrane systems sit in the upper part. A paint-on acrylic coating costs $1.50 to $3, but it only resists water. On a Utah deck, repairs to plywood, flashing or concrete come on top.
Complete Concrete Coatings has coated decks and concrete along the Wasatch Front since 2005, from our shop in Centerville. The ranges below come from published cost guides and coating companies, and every table row names its source. None of them are our prices. How we build a deck system, layer by layer, is on our waterproof deck coatings page.
What does deck waterproofing cost per square foot?
US Made Supply’s guide puts the waterproofing layer at $3 to $12 per square foot. Labor is 40 to 60 percent of that. ArmorThane’s deck guide puts a sprayed polyurea system at $6 to $12. A sheet membrane under pavers or tile runs $6 to $12, installed. Paint-on acrylic coatings cost $1.50 to $3.
| System or job | Published range | Source |
|---|---|---|
| Paint-on acrylic coating or sealer, water resistant only | $1.50 to $3 per sq ft | US Made Supply cost guide, reported trade range |
| Deck waterproofing layer, typical job | $3 to $12 per sq ft | US Made Supply cost guide, reported trade range |
| Bonded membrane system, cement and acrylic or liquid elastomeric | Upper part of the $3 to $12 range | US Made Supply cost guide |
| Sprayed polyurea system | $6 to $12 per sq ft | ArmorThane deck waterproofing guide |
| Coating system on a concrete deck | $3 to $12 per sq ft | ArmorThane deck waterproofing guide |
| Sheet membrane under pavers or tile | $6 to $12 per sq ft, installed | US Made Supply cost guide, reported trade range |
| The same deck coating on new construction | $4 per sq ft | US Made Supply cost guide |
| The same deck coating on a replacement job | $30 or more per sq ft | US Made Supply cost guide |
US Made Supply sells deck coating systems, and its guide says to use these ranges to check bids. The big national cost guides mostly price a different job. HomeAdvisor’s $0.75 to $4 per square foot is for sealing a wood deck. ArmorThane’s guide says it found no reliable published price for a liquid or vinyl membrane over plywood.
Pool decks have their own page, pool deck coatings, since they use a related system.
What does it cost to waterproof a deck over a garage or a room?
A deck over a garage or a room calls for a full membrane system. US Made Supply puts bonded systems in the upper part of its $3 to $12 range. On a 200 square foot deck, that full range works out to $600 to $2,400 for the waterproofing layer. Repairs and flashing come on top.
Water that gets through a deck like this ends up in the ceiling below. The membrane is the layer that keeps it out. US Made Supply’s guide warns against cutting the scope down to a sealant when a deck sits over occupied space.
Our system starts with prep. Wood decks are sanded, every seam is checked, and flashing goes in where a wall or edge needs it. Then comes a rubberized membrane base coat that flexes as the deck moves. A decorative layer and a sealing top coat finish it.
Each layer cures before the next one goes on. That is why a full deck job can run up to 6 days from the first day of prep.
Which deck waterproofing system lasts longest?
Life depends on the system and the upkeep. Westcoat says its deck systems can last up to 30 years or more when properly maintained. US Made Supply puts quality liquid-applied systems at 10 to 20 years. A trade article on Duradek’s site puts its vinyl membrane at 15 to 20 years on average.
| System | Where it fits | Strengths | Limits | Expected life |
|---|---|---|---|---|
| Membrane, decorative layer and sealing top coat, bonded in layers | Decks over living space, balconies and walkways, on plywood or concrete (Deck Flex, Westcoat) | One continuous membrane; can carry a Class A fire rating (Deck Flex, US Made Supply) | Premium price (US Made Supply); reseal every 3 to 5 years if needed (Westcoat) | Up to 30 years or more when properly maintained (Westcoat); 15 to 20 plus years (Deck Flex) |
| Liquid-applied elastomeric or urethane membrane | Restoration work and odd shapes (US Made Supply) | Mid-range price; bonds to the deck (US Made Supply) | Class B fire rating and a 5 to 10 year warranty are typical (US Made Supply) | 10 to 20 years with proper maintenance (US Made Supply) |
| Vinyl sheet membrane | Residential decks (Duradek article) | The sheet is the walking surface (Valordek) | Needs protection from cuts and hot coals; life depends on the seam welds (Duradek article) | 15 to 20 years on average for Duradek vinyl (Duradek article) |
| Urethane, polyurea or fiberglass system | Large commercial projects (Duradek article) | Sprayed polyurea runs $6 to $12 per sq ft (ArmorThane) | Not listed | Not listed |
| Paint-on acrylic coating | A decorative finish that resists water (US Made Supply) | Lowest price, $1.50 to $3 per sq ft (US Made Supply) | Not true waterproofing (US Made Supply) | Not listed |
A professional-grade deck coating can last over 20 years when it is applied and cured correctly. Westcoat says many installations far outlive even its 20-year warranty. Its buyer’s guide also calls for a reseal every 3 to 5 years if needed. Ask about the reseal schedule when you compare prices.
Warranty level moves the price too. US Made Supply’s guide lists three levels: 5-year maintenance, 10-year system and 15-year or longer maker-backed warranties. On our jobs, the manufacturer’s warranty passes to you, and every product goes on to the maker’s specifications.
Which system makes sense for a Utah deck?
For a Utah deck over living space, a garage or a walkway, a flexible membrane system fits best. It goes over sound, repaired plywood or concrete. A decorative wear layer and a sealing top coat go over the membrane. The membrane bends as the deck moves through hard freezes and summer heat.
NOAA’s 1991 to 2020 normals for Salt Lake City International Airport show what a deck goes through. Snow there averages 51.9 inches a year. At least an inch covers the ground on about 45 days. Snow on a deck can sit for days before it melts.
The low drops to 32 degrees or colder on about 112 days a year. On about 91 of those days, the high climbs back above freezing. Meltwater in a seam or crack freezes at night and pushes it apart. Highs reach 90 degrees or more on about 62 days, and that sun bakes the same surface.
A membrane that flexes keeps up with that movement. Park City decks carry heavier snow, so their season tends to open later in spring.
What raises the price of deck waterproofing?
Size and shape set the base price. The deck’s condition comes next. Plywood that has gone soft or delaminated adds prep, and so do open seams and spalled concrete. Access counts, since an upper balcony or stairwell takes longer than a patio. Extra design passes, flashing, drainage fixes and commercial staging add more.
An old coating that is failing adds work too. US Made Supply’s guide explains a big gap. The same deck coating can cost $4 per square foot on new construction and $30 or more on a replacement. On a replacement, the crew strips the old coating and checks for moisture. Then every joint at the walls and drains gets new flashing.
On a concrete deck, cracks and spalls get concrete repair before the membrane goes on. That repair shows up in the price.
Repairs can cost more than the coating itself. US Made Supply lists these per-balcony figures from California apartment balcony repairs. By the same guide, Los Angeles and Bay Area trades run 10 to 25 percent over the national average.
| Added work on a California apartment balcony | Published range | Source |
|---|---|---|
| Waterproofing and resurfacing only | $1,500 to $5,000 per balcony | US Made Supply cost guide |
| Flashing replacement | $500 to $2,500 per balcony | US Made Supply cost guide |
| Structural framing repair | $3,000 to $15,000 or more per balcony | US Made Supply cost guide |
| Lift or scaffolding | $2,000 to $6,000 per setup | US Made Supply cost guide |
The same guide shows how fast repairs add up on those balconies. A new system over sound plywood, with the old one stripped, runs $36 to $42 per square foot. New flashing raises that to $50 to $60. Replacing the plywood too brings it to $75 to $80, roughly double the first figure.
What does balcony and walkway waterproofing cost?
Small balconies cost more per square foot than a big deck. Valordek, a deck membrane maker, puts that down to setup and detail work spread over fewer square feet. US Made Supply’s guide adds that balcony jobs are often priced per balcony. On balconies of 50 to 80 square feet, setup, containment and lift costs drive the price.
Walkways and balconies on apartment buildings, HOAs and hotels carry foot traffic every day. Many of them sit over units or parking. We work those jobs in sections, so residents keep a way in and out. Property managers get the dates for each section early, so they can post notices.
Commercial pricing covers the staging and the schedule. A property with several buildings or phases can be priced and scheduled as a single project.
How do you get a real price for your deck?
A real number for your deck needs an on-site look. We measure the deck and check the plywood or concrete for soft spots, open seams and failed flashing. The estimate is free, and you get a written price for the system that fits your deck before we leave.
Spring through fall is the season for deck coatings. The deck must be clean and dry, and the coating has to cure with no rain or snow on it. The season books early, so winter is the time to plan and book.
Call (801) 347-4518 Monday through Friday, 8am to 5pm, or ask for a free on-site estimate.